Site Information

  • Cell Phone EMF Harmonizer
  • Image 2
  • Image 3
  • Image 4
  • Flower of Life
  • Tree of Life
  • Seed of Life
  • OM
  • Icosahedron
  • Merkaba
  • Metatrons Cube
  • Sri Yantra
  • Crown Chakra
  • Plain
  • Wireless Charging

Cell Phone EMF Harmonizer


Product Description

Cell Phone EMF Harmonizer

This piece of technology was designed using specific materials to harmonize and transmute the EMF cell phone signal. The composite material is a matrix of specific materials and geometries that are designed not to block the EMF signal but rather change the spin field (information field) to one that is harmonious. It can be placed in a variety of locations either directly on the phone itself or phone case. 

Circular Cell Harmonizers:
Size: 2” diameter (3/16” thick)

Weighs: Only 0.5oz
Attaches via adhesive backing (peel and stick)

Rectagular Cell Harmonizer:
The Rectangular Cell Harmonizers are specifically designed for people who charged their phones wirelessly (phones that charge without having to be physically plugged in). 

Size: 3.5" x 2” (just under 3/16” thick)
Weighs: Only 0.5oz
Attaches via adhesive backing (peel and stick)

Can the Cell Phone Harmonizer be used on a regular house phone
Yes, in addition to a cell phone it can also be used on a land line, router and mobile hotpot. 

What are the Phone Harmonizers made of?
The phone harmonizers are made of a proprietary composite we have developed that is made up of specific components that are cast using an eco non-toxic resin. Although we do not disclose the contents of our phone harmonizers we will say that they do contain elite shungite and silver along with some very important other ingredients.

Do the Cell Harmonizers Contain Radioactive Material?
No. All the materials and minerals used in our products are totally safe and do not contain any radioactive materials.  Even the epoxy we use as a binder is non-toxic.   

Will the Cell Harmonizer Stick to every Cell Phone Case?
In order to adhere properly you need a case that an adhesive tape would be able to stick to. Silicone cases do not work as nothing will stick to them. Also phone cases that have raised texture sometimes do not allow for the best adhesion. Most plastic cases work fine. Quite frankly if your cases does not work for adhering the Cell Harmonizer it would be worth considering getting a case that does as having a Cell Harmonizer on your phone is of great benefit. 

Where do I place the Cell Phone Harmonizer on my phone?
Although the location for the Cell Harmonizer on the back of your phone or phone case does not matter for its function, it can interfere with other parts of your phones function if the following steps are not followed. 

  • Most people like to place the Cell Harmonizer in the middle of their phone. Note for wireless charging station users - the center generally does not work, so choose the top or bottom. 
  • We highly recommend that before you adhere it briefly try various placement options to find the best one for you. Before pealing off the paper backing which reveals the self-adhesive backing - use a rubber band to temporary hold the Cell Harmonizer in place and experiment with different placements to figure out where it would work best for you before installing it. 
  • Make sure you do not block your cell phone camera lens, speaker, or wireless charging station port. Note how cell phone with Cell Harmonizer fits in a car cell phone holder.
  • Once you find the perfect place remove the paper backing and adhere in place. You get one shot to adhere it, so take your time and be sure you are happy with the spot you chose.

Can I remove my Cell Phone Harmonizer?
The Cell Harmonizer has permanent adhesive on the back, however if carefully done it can be removed and reused. Care has to be taken when removing and and you are doing so at your own risk as it could potentially damage your phone or phone case. Conscious Technologies LLC is not responsible for any damage to your phone, case, or the Cell Harmonizer, should you choose to remove it. If you decide to chance it, the safest recommendation is to wear a pair of work gloves and using a putty knife and carefully slide the putty knife under the Cell Harmonizer. It is best to slowly work it under the Cell Harmonizer and avoid a prying motion as that is how it can damage your phone or case by excessive prying. 

Can an EMF or Trifled Meter Measure the reduction of the EMF’s?
No, we are not blocking the EMF we are transmuting the EMF to something harmonious. If you block the EMF your phone will not be able to send or receive calls. If you inhibit the signal your phone just emits a greater signal to compensate for the poor connection. Our technology is totally different in that it changes the man-made EMF spin field (information field) to something that is in greater resonance with people.

Made in Rhode Island, USA by Conscious Technologies LLC

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Find Similar Products by Category

Related Products

Click the button below to add the Cell Phone EMF Harmonizer to your wish list.